Germinate Weed Seeds In Water Cup

ILGM

Buy Cannabis Seeds Online

Handling cannabis seed germination is no difficult task, but it requires a great deal of precision and care. If you can provide that, you’re good to go. I was going to just put my seeds in a cup of room temp water to germinate……..But ive read that this is not a good idea, because if the seed is in the… With various methods on how to germinate marijuana seeds for beginner and advanced technique, it all just comes to your preference on what type to use.

How to Germinate Cannabis Seeds

Cannabis, better known as marijuana, is getting more popular across the United States as more medical reports deem it highly useful for better health and more states legalize its sale and use. There’s no question of how potent and beneficial marijuana is for health and recreation, so it is no surprise that more individuals are more getting interested in growing the herb in their homes.

Like any other plant, cannabis goes through the germination process before full growth. Handling cannabis seed germination is no difficult task, but it requires a great deal of precision and care. If you can provide that, you’re good to go.

Below here, we breakdown the main aspects of cannabis seed germination you need to know.

The Ideal Germination Conditions for Cannabis

For maximum cannabis seed germination, you need to provide the following conditions:

Moisture

Marijuana seeds need adequate moisture in the soil to develop properly. You can maintain moisture by using well-watered soil or a naturally-moist medium such as compost. Alternatively, you can use mulch on the ground to lock the moisture in.

Stability

Your seeds need a stable setup during planting to guarantee proper germination. You can achieve this by placing the seeds about 1.3cm to 2.5 cm into the medium, not any further or closer to the medium surface.

Temperature

Marijuana seeds require a proper balance between hot and cold temperatures for proper germination. Keep the temperature around the germinating area adequately warm, because colder temperatures tend to delay the germination process.

Direction

Marijuana seeds need direction when being germinated. When placing the germinated seed into the growing medium, ensure that the white root is looking downwards into the medium and the seed body is looking upwards. Positioning it otherwise means the root will have to reorganize itself, which can slow germination.

Seed Germination Methods

There are more than a few options to choose from when picking a method for your seed germination process. We list and explain the best of them below:

Use Starter Cubes & Seedling Plugs

This is the most recommended cannabis seed germination method on this list because of its ease. Starter cubes and seedling plugs are specially designed for the purpose of seed germination, so they come filled with the right kind of planting mix and a hole drilled adequately in the middle for placing your seed. All you have to do is place your seed carefully into the hole and close it with a simple pinch of the nearby planting mix.

The Pros
  • They have high germination rates thanks to adequately pre-set conditions
  • They are easy to use; you open them up and start planting
  • They give less room for error
  • Some of them are designed to allow hydroponic growing (water-based planting)
  • They aren’t too expensive
The Cons
  • Are usually sold in packages of 50 plugs or more at once, no less.
  • Some plugs dry out too quickly after opening.
  • Some plugs must be soaked for a while first before use.

Plant your marijuana seeds directly in the final growing medium

Another good method for germinating your cannabis seeds is by planting them within your final growing medium from the very beginning, whether it is soil or compost or water.

The Pros
  • The seeds don’t get transplant shock during transplanting
  • The seeds get accustomed to the medium early on, which fosters growth
The Cons
  • Some final mediums are not adequately nutrient-rich to support cannabis seed germination in its earliest stages

Use a germination station

For best seed germination results, you can alternatively employ a germination station before transferring to a final growing medium. Germination stations are pre-designed to offer optimum conditions for germination.

The Pros
  • Germination stations are cheap to purchase
  • You can create your own DIY germination station at home using a plastic dome fitted over a plate that’s placed on a heating pad.
The Cons
  • Germination seeds are only appropriate for the early stages of growth, unlike, say, the final medium.

Soak Your Marijuana Seeds in Water Overnight

Alternatively, you can germinate your cannabis seeds using water alone. Place the seeds in a glassful of mildly warm water overnight and wait for the white root to break through the seed shell. Then you can transfer to a final growing medium.

The Pros
  • It works well for seeds with extra hard seed coats
  • Cuts out all the extra preparation required in soil-based germination
The Cons
  • Some seeds, especially the older ones, cannot germinate in water because they require a longer time
  • There is always the risk of over soaking the seeds and killing them

Try the Paper Towel Method

The most DIY cannabis seed germination method on this list is the paper towel method, which involves wrapping your seeds in thin paper towels, making them wet and leaving the setup a warm place. Soon enough, the white roots start showing and the seeds can then be transplanted.

The Pros
  • It is so cheap; the thinnest (and cheapest) paper towels work best
  • It is so easy to do.
The Cons
  • Thicker paper towels can be hard to separate new seedlings from after they’ve sprouted
  • There is a high possibility for errors during transplanting, such as root breakage when seed roots are found to have grown into the paper towel, not on its surface.
  • Paper towels can dry if unattended, thereby killing the new seedlings.
See also  Afghan Weed Seeds

Planting Germinated Seeds

Once the cannabis seeds have germinated, they need to be planted in order to grow into proper cannabis plants. The recommended method for planting cannabis seeds includes the steps below:

Step One : Set and prepare your planting medium. You can use either a rooting cube or a planting mix for planting, depending on your preference. Rooting cubes have no major preparation requirements –have one ready from Oasis, Jiffy or another good brand. If you’re using a planting mix, procure sterile soil for the process. Random soil doesn’t cut it here.

Step Two : Next, add water to the sterile soil or rooting cube to saturate it. Then use a needle or chopstick to drill small planting holes within the soil or rooting cube. Please do not use your finger for this task.

Step Three : Get your tweezers and sterilize them with alcohol or spirit first. Then use the tweezers to pick the seeds, paying good attention to the fragile white roots.

Step Four : Place each germinated seed into a hole of its own, ever so tenderly, such that the root faces downward. Don’t place the seeds too deep into the ground either, because it slows growth. Move quickly because the roots are easily damaged by exposure to the atmosphere.

Step Five : Next, cover each of the holes with adequate soil or rooting cube. Make sure the planting mix or root cube is moist and not too cold.

Conclusion

Germinating and growing cannabis seeds requires a bit of work, but when done right, the end results are worth every minute spent. Like any other plant, cannabis seeds have to go through germination and then plant growth. Making sure each of these stages is done right will guarantee you a super bouncy harvest every time.

Germinate Seeds in cup of water.

I was going to just put my seeds in a cup of room temp water to germinate. But ive read that this is not a good idea, because if the seed is in the water for over 24hours it gets no oxygen. Causing the seed to not crack open. Has any one had success with this method? It seems like an easier way then the paper towel method

norcaliiguy
Active Member
tea tree
Well-Known Member

THis is the only method I use. I let them soak until I see a long taproot. I used to just wait until I saw a taproot crack, in say 18hours, but the last few seeds I just let go a coupke of days and let these mega taproots grow. I then popped them into rapid rooters and a day later I have advanced seedlings rooted and fine. I am pleased. The paper towel method is bad, it means that little root hairs will get stuck to the paper towel and get stressed or damaged and also their is so much that can go wrong there and the worry over heat and cold is there where as with the cup of water nothing ever goes wrong. Hot or cold it always works.

DoeEyed
Well-Known Member

tea tree, what percentage rate of germination do you get doing that? Have you had any seeds drown doing it this way?

Mdot923
Active Member

THis is the only method I use. I let them soak until I see a long taproot. I used to just wait until I saw a taproot crack, in say 18hours, but the last few seeds I just let go a coupke of days and let these mega taproots grow. I then popped them into rapid rooters and a day later I have advanced seedlings rooted and fine. I am pleased. The paper towel method is bad, it means that little root hairs will get stuck to the paper towel and get stressed or damaged and also their is so much that can go wrong there and the worry over heat and cold is there where as with the cup of water nothing ever goes wrong. Hot or cold it always works.

What is rapid rooters? Im new to growing with seeds sry. Is there a limit to how many i can put in a cup?

bubbastickyfingers
Active Member
tea tree
Well-Known Member

lol, ah a class. I get 100 percent germination this way. I had lost some seeds before using the paper towel or just popping them into media. No paper towel is needed with the cup of water. Just dark. I, in fact use plain tapwater straight from the faucet. Not cold not hot. Then place them in the dark. Traditional knowledge says that when they sink they are ready to go into soil, rapid rooter, rockwool, etc, etc. However, I dont mess with that and simply wait until I thinj the taproot is out far enough for how I feel that day, lol. That simple.

Rapid rooters are a gift from god. Or whoever it is that makes them. Very nice. Google `em. Very cheap and very handy. A coco peat or something material that is meant for hydro or soil. I have used them succesfully 100 percent of the time for both. No lie. They are also the perfect cloning medium.

When a seed has the taproot I use tweezers and place it into a rapid rooter cube or cone. Then I take a little peice of anything handy and gently cover the whole in the rapid rooter cube. The seed needs darl to keep sprouting and take root. After a day or two tops the seed will be poking out. Then just let it go.

See also  Can You Eat Weed Seeds

Here it gets tricky about half the time. Because the seed does not half to push thru dirt the shell is usually stuck so a little very very very areful nuding is sometimes needed or the plant will die in the shell. It is Very obvious when this happens and what needs to be done and is actually pretty fun to do. SO dont stress. Also I like to put a clear plastic cup over the rapid roooter or the patch of dirt I bury the germed seed to keep the humidity up.

Keep the rapid rooter soaked. Keep the dirt wet too. Whatever you use. Rapid rooters are impossible to overwater. If you sprout in dirt be careful and just wet the the toplaer so as the seed stays moist.

Mdot923
Active Member

lol, ah a class. I get 100 percent germination this way. I had lost some seeds before using the paper towel or just popping them into media. No paper towel is needed with the cup of water. Just dark. I, in fact use plain tapwater straight from the faucet. Not cold not hot. Then place them in the dark. Traditional knowledge says that when they sink they are ready to go into soil, rapid rooter, rockwool, etc, etc. However, I dont mess with that and simply wait until I thinj the taproot is out far enough for how I feel that day, lol. That simple.

Rapid rooters are a gift from god. Or whoever it is that makes them. Very nice. Google `em. Very cheap and very handy. A coco peat or something material that is meant for hydro or soil. I have used them succesfully 100 percent of the time for both. No lie. They are also the perfect cloning medium.

When a seed has the taproot I use tweezers and place it into a rapid rooter cube or cone. Then I take a little peice of anything handy and gently cover the whole in the rapid rooter cube. The seed needs darl to keep sprouting and take root. After a day or two tops the seed will be poking out. Then just let it go.

Here it gets tricky about half the time. Because the seed does not half to push thru dirt the shell is usually stuck so a little very very very areful nuding is sometimes needed or the plant will die in the shell. It is Very obvious when this happens and what needs to be done and is actually pretty fun to do. SO dont stress. Also I like to put a clear plastic cup over the rapid roooter or the patch of dirt I bury the germed seed to keep the humidity up.

Keep the rapid rooter soaked. Keep the dirt wet too. Whatever you use. Rapid rooters are impossible to overwater. If you sprout in dirt be careful and just wet the the toplaer so as the seed stays moist.

Germinating Marijuana Seeds in a Water Cup

We have seen many methods of growing marijuana seeds. From the most basic to the advanced technique, cultivating marijuana is a well-loved hobby for beginners and experts alike. With various methods on how to germinate marijuana seeds, it all just comes to your preference on what type to use.

Why You Need to Germinate Marijuana Seeds

Marijuana germination is the procedure where a sprout breaks out of the seed’s coating. The sprout looks like a small white tendril and it is extremely delicate. It is the plant’s initial root and it is often referred to as the “taproot.” All the upcoming roots created by your marijuana plant will grow from the taproot. This means that the taproot is the building block of all your plant’s potential roots in the future.

The taproot, together with a few other tiny young offshoots around it – will grow and develop into longer and stronger roots. They will push the seed above the ground until the shell emerges from the surface of your growing medium and grow its first leaves known as the “cotyledons.”

These initial round leaves will sprout from the inside of the marijuana seed. The cotyledons developed as part of the plant embryo in the seed, which means there’s no need for the marijuana seedling to grow them. The sprouting first leaves are the ones that break open the shell after the taproot cracked it open.

How to germinate marijuana seeds

Marijuana seeds need three things to achieve successful germination and these are heat, water, and air. Using these, you can perform the simplest and easiest technique to germinate your seeds. But first, you’ll need paper towels, two clean plates, and marijuana seeds.

Here’s the process of this germination technique:

  1. Take your paper towels and soak four sheets in the distilled water. The sheets should be saturated with water but they shouldn’t have any excess dripping water.
  2. Get two sheets of the saturated paper towel and place them on one plate. Then, arrange the seeds on top of the plate with at least one inch of space between them. After that, get the remaining sheets of paper and cover it on top of the seeds.
  3. You need to make a dark protected area for your seeds. You can do this by covering the top with the remaining plate. This will create a dome-like space for your seeds to germinate.
  4. Lastly, keep the area warm and follow the correct temperature between 70-90°F.

These are all the steps to germinate your marijuana seeds. Once you completed each step, you only need to wait.

Don’t be impatient because this stage is crucial for the overall growth of your plant. Make sure you check the paper towels from time to time. If the papers are starting to lose their moisture, spray a little amount of water. Maintaining the proper amount of moisture around your seeds will keep them healthy and happy.

See also  Best Cannabis Seed Genetics

Note: each seed has different germination speed. Some may take longer than the others and that’s normal. You can tell that your seed has germinated once it breaks and one sprout begins to emerge from it. This sprout is the taproot of your seeds and it will be its main stem. Once you see the taproot growing from the seeds, that’s the indication that your germination process is successful. By this point, refrain from touching the seed or the taproot since it can disrupt their development.

Proper Way of Transplanting Germinated Marijuana Seeds

When the germination stage passes and your marijuana seeds have grown their taproot, it’s time to transplant them to a growing medium of your choice. Just like how you treat your seeds during germination, you also need to be extremely careful when transplanting your little plants. Remember, they are not yet fully-grown which makes them powerless against stressful factors.

Follow the steps below to properly transplant your germinated marijuana seeds:

  1. Prepare the growing medium in which you will transfer your germinated seeds. You can start with small 2-inch pots since they are cheap and easy to access. What you need to do with the pots is to fill them with coarse and light potting soil. Then, place a hole in the middle, which is at least a quarter-inch down the soil using a pencil or pen.
  2. When your growing medium is ready, it is time to transfer the seeds. Using a pair of tweezers, slowly pick up the seeds and place them in your growing medium, specifically inside the hole. Make sure its taproot is facing downwards. Then, gently cover it with soil.
  3. Next, you need to water the soil using a spray bottle. This will provide moisture in all areas of the soil without the risk of drowning your seeds. Remember that you should only provide sufficient water to your seeds because overwatering them can kill the little sprout.
  4. Lastly, you need to check the moisture level and temperature of the soil to maintain the good condition of your seeds. After a week, you can expect the seedlings to start appearing in your growing medium.

Germinating Marijuana Seeds in a Water Cup

If you want a cool, new method to germinate your seeds, the following has a 100% success rate. Though the results may vary, just like what usually happens to the all-natural growing method, this one is easy which is perfect for first-time growers.

First, you need the following materials before you start:

  • 1 plate
  • a glass of distilled water
  • paper towel
  • tweezers
  • pill bottle

A little reminder before you start with the method is you should always use distilled water.

  1. Never utilize tap water because it carries impurities that might harm your seeds. Lastly, see to it that your germinating space is situated inside an enclosed room that has a temperature of 18 to 25 °C. The following are the steps to follow on how to germinate marijuana seeds in a water cup:
  2. Place your seeds inside a cup or glass of distilled water. Some will instantly drop to the bottom while others will float. Leave them for a few hours until their shell is penetrated with water and then push them to the bottom of the cup/glass using your fingertips. Allow the seeds to soak for 15 – 18 hours. The soaking process will moisten the shell of the seeds which makes it easy for them to germinate.
  3. Get a thick dye-free paper towel and place it on top of a plate. Place the soaked seeds in the paper towel and position them with enough spaces around each other. Fold the paper towel to envelop the seeds.
  4. Place it in a warm and dim area until the seeds start to crack. Make sure the seeds are well-moisturized so check it every 5-12 hours and use a spray bottle to add water onto it.
  5. Be patient. Seeds may take seven days or longer to germinate. Remember that each seed has a different germination phase.
  6. Once the taproot begins to appear, you can transplant your germinated sprouts to your desired growing medium. Make sure the taproot is facing downwards when you plant it.

Most marijuana seeds take 1 to 2 days to germinate, while others take a week. This depends on the thickness of their shells. Each seed has different features and physical characteristics, hence the difference during the germination process. If you follow all the steps of the germination method we mentioned above, you can expect 80% success rate.

Conclusion

Knowing the right way of germinating your marijuana seeds is vital in starting your weed production. You can choose from all the methods we have provided above. Just make sure that you give your plants everything it needs including food, light, and water. They should also be kept in a growing space with proper levels of humidity and temperature.

Establishing an ideal environment for your plants will help you avoid obstacles along the way. Above all, be organized and precise. Place your seedlings, seeds, and clones in a clear jar and label them. This will help you avoid confusion and expensive mistakes as you learn how to germinate marijuana seeds. Now go and get your pot production going!

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.